Skip to content
Built2Bid

Deck Board Calculator: How Many Deck Boards Do I Need?

Enter the deck area, your board length, face width and gap. The calculator works out the linear feet of board and the number of boards, with your waste allowance.

Section 1
+ 1
ft
ft
×
How many identical pieces
ft
in

Actual width, e.g. 5.5 in for a 5/4×6

in

Blank = no gap. 3/16 in = 0.1875

%

Added after deductions

Enter the measurements above to see the result.

Opens a decks & porches estimate with this quantity filled in. No account needed.

Deck board calculator FAQ

How do you calculate how many deck boards you need?

Board linear feet = deck area in square feet × 12 ÷ (board face width + gap, in inches). Add your waste allowance, then divide by the board length to get the number of boards.

What face width should I use?

Use the actual width of the board, not the nominal size. A 5/4×6 or 2×6 board is usually about 5.5 inches wide. Check the product sheet for the exact figure.

Is the board count rounded up?

Yes. The number of boards is rounded up to a whole board, the same way the Built2Bid estimate builder does it.

More free tools and guides