Skip to content
Built2Bid

Roofing Calculator: Roof Squares from Measurements and Pitch

Measure each roof plane from the ground or a plan, enter its pitch, and the calculator applies the pitch factor, adds your waste and converts to squares (100 square feet).

Section 1
+ 1
ft
ft
/12
Rise in inches per 12 in of run (0 for flat)
×
How many identical pieces
%

Added after deductions

Enter the measurements above to see the result.

Opens a roofing estimate with this quantity filled in. No account needed.

Roofing calculator FAQ

What is a roofing square?

A roofing square is 100 square feet of roof surface. Shingles and roofing labor are usually priced per square.

How does pitch change the roof area?

A sloped roof has more surface than its footprint. The pitch factor is √(1 + (rise ÷ 12)²). For a 6/12 roof it is about 1.118, so 1,000 square feet of footprint is about 1,118 square feet of roof.

What if I measured on the roof itself?

Choose "On the roof surface" under Dimensions measured. The calculator then skips the pitch factor, because your measurements already include the slope.

More free tools and guides